[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Problem with Scantronic avenger VI

Subject: Re: Problem with Scantronic avenger VI
From: Euh <EuhSCQ@xxxxxxxxxxx>
Date: Fri, 27 Aug 2010 18:04:48 -0700 (PDT)
Newsgroups: alt.security.alarms
References: <6bc58113-f621-4cbe-b8c1-328cdfac6c89@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <c418057f-5d14-4527-9157-664d9f5fbb15@xxxxxxxxxxxxxxxxxxxxxxxxxxx> <df617016-d377-4761-a3b2-aec6d253e396@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

> You should totally power down panel =A0then power up ac then hook up
> battery to let it do a complete reboot and clear out any troubles.
> once electronics start acting up like computers it better to turn them
> off and start from scratch to allow the micro processors to reboot.


I'm glad to report that all is fine now (simulation worked: bell rang,
central was notified, etc)

We'll see how long this battery will last.

thanks for the help/discussion

Follow-Ups:
- Re: Problem with Scantronic avenger VI
  - From: Jim

References:
- Problem with Scantronic avenger VI
  - From: Euh
- Re: Problem with Scantronic avenger VI
  - From: Euh
- Re: Problem with Scantronic avenger VI
  - From: nick markowitz

Prev by Message: Re: Problem with Scantronic avenger VI
Next by Message: Re: ADT & Broadview Merge Commercial
Previous by thread: Re: Problem with Scantronic avenger VI
Next by thread: Re: Problem with Scantronic avenger VI
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home