Re: Bosch Solution Alarm Help

[Frank Olson <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>]

Ian wrote:
> On Wed, 26 Nov 2008 07:18:35 -0800, Frank Olson
> <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>
>> Ian wrote:
>>> On Tue, 25 Nov 2008 20:37:51 -0800, Frank Olson
>>> <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote:
>>>
>>>> Ian wrote:
>>>>> I have a Bosch Solution alarm "Ultima 880" Australia
>>>>> To go into my daughters house.
>>>>>
>>>>> From what I have read, to get 8 sectors out of it,
>>>>> you need to use "Split EOL resistors" 3k3 & 6k8   1%
>>>>>
>>>>> Am I correct?
>>>>>
>>>>> Any hints for install?
>>>>>
>>>>> Thanks ....Ian
>>>>>
>>>>>
>>>> Do you have the manual??
>>> Yes have manual,
>>> it does need split eol resistors
>>> for the 8 sectors
>>>
>>> Thanks Ian
>>>
>>
>> I wouldn't even attempt an installation without the manual.  It gives
>> you minimum wiring requirements, connection and programming
>> instructions.  For anything involving fire detection, it also gives you
>> the list of compatible detectors.  If you're having problems
>> interpreting sections of the programming instructions (because you're
>> unfamiliar with the protocols or terminology), feel free to ask for
>> help.  I think you'll find most of your answers in the manual, though.
>> It may take you a couple of "reads" to get it all.  One more thing:
>> Most manufacturers provide manual addendums (in the form of single or
>> multiple page sheets packed with the panel/manual).  Don't throw them
>> away!  :-)
>
> Have another question re 880
> It supposedly has
>  4x  burglary zones (1-4) 3k3 on delay
>                       and
>  4x  24 hour zones  (5-8)  6k8 on Instant(tamper)
>
> Have 6 x  PIR's for in house
>  Can I make those 24 hour zones be on delay
> or do i double up PIR's on the 4 burg zones.
>
> I did try to convince my daughter to get
> it installed professionally.
>
> Any help appreciated ...Ian


You might try reading a bit more here:

http://yoursecuritysource.com/alarmoverviewfaq.htm

Also:

http://yoursecuritysource.com/faqs.htm

Good luck!!