Re: usb serial compass

["Nick Markowitz Jr." <nick-markowitz@xxxxxxxxxxx>]

unit was showing on comport 7 ran the utility and put it on 4 and seems to
work fine thanks for all the help

"Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
news:aavHj.1213$Eq.722@xxxxxxxxxxx
> The keyspan unit works great. Just make sure the keyspan utility points to
> the right com port. Com 1 or 2 depending if your comouter has a built it
> modem. You have coms1 thru 4 to choose from on Compass.
>
> Jim Rojas
>
>
>
> Roland Moore wrote:
>> Okay. If it is on COM 3, is it in both the computer settings and in the
>> Compass software as COM 3?
>> Do you see the USB device COM port 3 in the computer's device manager
>> settings?
>> Do you have the USB device COM port setting correct to like 8-1-none for
>> example? What baud rate do you have the COM port set for in the device
>> manager setting for the USB device as well as the software utility for
>> the
>> device?
>> Do you see the Modem in the computer's Control Panel under modems?
>> Have you tried to add the modem there?
>> Did you do any diagnostics there?
>> Is there any other download program running or any other software that
>> could
>> be "grabbing" the COM port away from Compass?
>>
>> "nick markowitz" <nick-markowitz@xxxxxxxxxxx> wrote in message
>> news:vzrHj.1194$Eq.399@xxxxxxxxxxx
>>> Using a 1200 Hayes and it landed on comport 3
>>>
>>>
>>>
>>> "Roland Moore" <nospam@xxxxxxxxxx> wrote in message
>>> news:47edd9ce$0$22797$4c368faf@xxxxxxxxxxxxxxxxx
>>>> Not running any version of Vista I hope?
>>>> Okay it is my understanding that the Keyspan USB to serial adapter is
>>>> mostly
>>>> for the 4100SN.
>>>> What brand modem are you using?
>>>> What COM port did the Keyspan land on? Is that the same port you set
>>>> the
>>>> modem to in Compass?
>>>> More information is needed.
>>>>
>>>> "nick markowitz" <nick-markowitz@xxxxxxxxxxx> wrote in message
>>>> news:CoiHj.1178$Eq.555@xxxxxxxxxxx
>>>>> OK I got the specific USB to serial adapter they call for to be able
>>>>> to
>>>> use
>>>>> compass software keyspan hs19
>>>>> loaded driver set software up everything loads correctly modem appears
>> to
>>>>> initialize but mode does not go off hook
>>>>> also noticed when modem initializes the lights on modem to not change
>>>> around
>>>>> like they normally do. any suggestions
>>>>>
>>>>>
>>>>
>>>
>>