Re: removing zones from ADT system

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

Lithium 9v right?

You need the installer code not the master code, and a programming sheet for
the 20SE...and a programming keypad.

BTW...you can toss the 7835C in the garbage.

The rest is doable.



--
**Crash Gordon**







<cl999@xxxxxxxxxxx> wrote in message
news:b640a812-b22b-4805-bbbc-9c19acda81cc@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I bought a house last year with ADT alarm. There is no monitoring
> contract as far as I know, ADT has never hassled us about leased
> equipment or continuing an existing contract. The previous owners gave
> us the master code. It is not currently being monitored, though we
> find the chime feature whenever a window or door has been opened
> useful so that's what we use it for. There are 3 ADEMCO 5850 wireless
> glass break sensors that I would like to remove from the system as one
> has gone bad (seems to short out any 9V battery I put in) and the
> battery has run low on the other 2. My question is how to remove zones
> from the setup? Searched this newsgroup and came up with some useful
> info, but none regarding removing zones. This is my setup:
>
> Ademco Vista 20SE control panel
> Safewatch Pro 2000 keypad (ADT)
> Alarmnet Ademco 7835c wireless receiver
>
> I saw one posting about Vista 20SE needing a keypad for setup, but
> instruction was for a different keypad than mine. Any help would be
> appreciated...