Re: t-moble sim to dsc 1500 alarm

[G. Morgan <alarmpro@xxxxxxxxx>]

Doug wrote:

>
>"G. Morgan" <alarmpro@xxxxxxxxx> wrote in message
>news:b49a1815216e0f379bec1c0f48d8492bnp@xxxxxxxxxxxxxxxxxx
>> alarman wrote:
>>
>>>Just hook your cell phone's alarm input to the alarm communicator's output
>>>terminals. (You will probably need to open the cell phone to find the
>>>proper
>>>terminals, unless you have one of the newer models.)  Then program your
>>>alarm panel for cellular auto-dial format, and put the code 757634 into
>>>the
>>>account number slot.
>>>
>>>Good luck!
>>
>> The account code should be 634757 for auto-dial cell format.  Geeze...
>>
>>
>
>He has a DSC1500 and it won't accept a 6 digit account number, I believe you
>can just drop the last 2 digits and the result will be the same.
>
>Also if the cell phone doesn't have an alarm input but does have voice
>dialing or if you just don't feel confident opening up your cell phone, it
>may be possible to connect the siren output terminals directly to the cell
>phones headset jack.I haven't actually tried this myself and its likely that
>not all cell phones are 100% compatible with this method so you should
>definitely call the manufacturer of the cell phone to verify if its
>compatible before connecting it up this way.

I thought the account number was programmed in the contacts section of
the phone itself under user "ALRM account number".

I believe there is a USB dongle available to connect the cell phone
directly to the DSC 1500's microprocessor to allow for 'superfast'
alarm quickness.  The OP may want to scour Ebay for one where they be
had on the cheap.