Re: Vista 10 SE and fire alarm

["Mark Leuck" <m..leuck@xxxxxxxxx>]

You went to all the trouble of getting the board from Ebay yet you did
nothing to find out how it works

<tempalte@xxxxxxxxx> wrote in message
news:6afbb2f7-8c44-436f-b330-a647de3a2392@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> My house has a Vista 10 SE alarm system.  The board was locked, so I
> ordered a new board off ebay and installed it.
>
> I was able to set both the installer and master code.s  After the
> system comes up the display shows "05 CHECK", then after a while the
> alarm goes off.  I don't have a sensor wired to zone 5 and I am unable
> to bypass it (I can bypass other sensors).
>
> Is it possible that zone 5 is wanting a fire detector on zone 5?  A
> motion sensor was wired to zone 5.  I disconnected that to make sure
> it was not the problem.
>
> Does that sound like the problem?  Any ideas on how to fix it?
>
> thanks
> chad