[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Texecom Primier Series
You need to contact David Partridge in the UK. He would be in a better
position to help you rather than I.
http://www.thesecurityinstaller.co.uk/Content/default.asp
dave-partridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
Jim Rojas
Frank Olson wrote:
> Peter K wrote:
>> Hi Guys.
>> Anybody know how to reset the engineer code, without defaulting the
>> system.
>> I read something in the installation manual, but it looks like you
>> need to be in programming mode already, then change the jumper.
>>
>> I would default the system, but the previous installer (who is no
>> longer on the scene), has 14 zones wired up, with 2 dual-channel and 1
>> single channel keyfob receiver, multiple partitions, etc.
>>
>> I want to be able to note down the current values before I reset.
>>
>
>
> Contact Jim Rojas at http://www.tech-man.com. He's got all the manuals.
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home