[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Texecom Primier Series

Subject: Re: Texecom Primier Series
From: Frank Olson <use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx>
Date: Sun, 21 Oct 2007 20:32:34 GMT
Newsgroups: alt.security.alarms
References: <gtadnf-LLrZWKIbanZ2dnUVZ8vednZ2d@xxxxxxxx>

Peter K wrote:
> Hi Guys.
> Anybody know how to reset the engineer code, without defaulting the system.
> I read something in the installation manual, but it looks like you need to
> be in programming mode already, then change the jumper.
>
> I would default the system, but the previous installer (who is no longer on
> the scene), has 14 zones wired up, with 2 dual-channel and 1 single channel
> keyfob receiver, multiple partitions, etc.
>
> I want to be able to note down the current values before I reset.
>
>


Contact Jim Rojas at http://www.tech-man.com.  He's got all the manuals.

Follow-Ups:
- Re: Texecom Primier Series
  - From: Jim Rojas

References:
- Texecom Primier Series
  - From: Peter K

Prev by Message: Re: Failure rate of window / door magnetic sensors
Next by Message: Re: Ademco 6139 with 5827BD Keypad
Previous by thread: Texecom Primier Series
Next by thread: Re: Texecom Primier Series
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home