[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: ademco vista 20p

Subject: Re: ademco vista 20p
From: Jim Rojas <jrojas@xxxxxxxxxxxx>
Date: Mon, 12 Nov 2007 23:48:51 -0500
Newsgroups: alt.security.alarms
References: <7b2214b25c62a@uwe>

It looks like your keypad is not addressed properly.

1. Power the system down & up again.
2. Press and hold the 1 and 3 buttons until you see an address number.
3. If the address is not 16, Press 16 then *.
4. That should get your keypad functional.

Jim Rojas

isafdomm wrote:
> i have a vista 20p and a ademco 6160 and when i power up the alarm it reads
> open ckt . it even reads that with nothing hooked up except keypad
>

--
Posted via a free Usenet account from http://www.teranews.com

Follow-Ups:
- Re: ademco vista 20p
  - From: David Rassenti

References:
- ademco vista 20p
  - From: isafdomm

Prev by Message: Re: ademco vista 20p
Next by Message: Re: PIRs for house with ceiling heating & cooling vents and "pets"!
Previous by thread: Re: ademco vista 20p
Next by thread: Re: ademco vista 20p
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home