Re: Programming a Napco GEM-P9600 V9 E-Prom Attn Robert Bass

["Roland Moore" <roland@xxxxxxxxxxxx>]

>Many other panels don't have a way to change it at all.
Like DSC PC 5010 that doesn't have daylight saving time adjust or PC 5020
that will have it forever wrong from now on and no "fix" for it either.

One more thing to thank Canada for.

"Robert L Bass" <no-sales-spam@bassburglaralarms> wrote in message
news:_a-dnW4I-OYW0ZzbnZ2dnUVZ_oipnZ2d@xxxxxxxxxxxxxx
> You don't even need to concern yourself with DST unless you're doing
> scheduled auto-arm, auto-disarm, etc.  The chip upgrade is to accommodate
> the US-mandated change in DST.  Many other panels don't have a way to
> change it at all.
>
> --
>
> Regards,
> Robert L Bass
>
> =============================>
> Bass Home Electronics
> 941-925-8650
> 4883 Fallcrest Circle
> Sarasota · Florida · 34233
> http://www.bassburglaralarms.com
> =============================>
>
>
> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:460143f5$0$490$815e3792@xxxxxxxxxxxxxxxxx
>> Napco needs a chip to do that? Sheesh.
>>
>>
>> "secure15" <secure15@xxxxxxxxxxxxx> wrote in message
>> news:c19Mh.1$iv.0@xxxxxxxxxxxxxxx
>> | You're also gonna need a version 11E Chip to correct the Daylight
>> | Savings Time Debacle.
>> |
>> |
>> | Sammi wrote:
>> | > I tried to get hold of you for quite some time today via the
>> phone...I
>> needed a pci-mini and some other stuff. Since I couldn't get hold of you
>> today, I picked one up elsewhere :-(.  Hopefully we cross paths at some
>> point :-). I need to setup camera's.so I do need further assistance
>> regarding purchases.
>> | >
>> | > I've got a GEM-P9600.  Went to change the time using the keypad...in
>> short, ended up disabling the entire alarm panel. DUH  All zones are
>> altered, nothing is recognized and the two additional keypads are now
>> obviously not in the system.  That's what you get when you use the 6
>> digit
>> master code via the keypad.lol
>> | >
>> | > .so now I have to re-program the setup via laptop.almost impossible
>> to
>> do via the keypad!!
>> | >
>> | > We are going to need a few cameras and other items.  I hope to get
>> hold
>> of you within the next day or so for a few additional items.
>> | >
>> | > . Do you have at least an e-mail address, I didn't notice one from
>> your
>> site?
>> | >
>> | > Once I connect the laptop.I've never used quickloader for windows.I
>> hope
>> it is a bit easier to use vs the keypad!!  Do you have any advice?
>> Probably
>> easier to discuss this via the phone.but any pre-help would be great.
>> | >
>> | > One thing that I've noticed is that the programming sheets (I've
>> downloaded a variety of versions obviously) vary a bit.  I'm assuming
>> that
>> the windows based utility is much easier correct?  Since I do not have
>> the
>> pci mini as of yet.I've not looked at the software configuration.  Is it
>> intuitive?
>> | >
>> | > How do I know which sheets to follow for my setup?  I don't think
>> I've
>> found an older programming sheet that matches my setup.  As mentioned,
>> the
>> E-prom is V9 and the keypads are  two GEM-RP1CA's and 1 GEM-RP1CAe.
>> | >
>> | >
>> | > Looking forward to doing business with you soon!
>> | >
>>
>>
>
>