Re: Radionics D9133DC serial port specs

["Roland" <roland@xxxxxxxxxxxx>]

I think the D9133DC is discontinued. I believe the part you need is a
DX4010i RS-232 Serial Interface Module.
http://fe0wap86.bosch.de/is-bin/INTERSHOP.enfinity/eTS/Store/en/-/EUR/BeAT_BuyerLogin-ShowFrameset;sid=4T1z_1hVzSzpkx2uwywqA1feZr90vh7h7nc=?Country=us&CountryLanguage=en&ShowCat=ST_NA%2elobT2399697547
There is a product that uses that module as well as the DX4020 (Ethernet
Module). That product called RPS Lite.
http://fe0wap86.bosch.de/is-bin/INTERSHOP.enfinity/eTS/Store/en/-/EUR/BeAT_BuyerLogin-ShowFrameset;sid=4T1z_1hVzSzpkx2uwywqA1feZr90vh7h7nc=?Country=us&CountryLanguage=en&ShowCat=ST_NA%2elobT2399697547
Otherwise each vendor of automation product uses their own communication
protocol to interface with the panel.

"Logan" <mcoinvestmentnospam@xxxxxxxxxx> wrote in message
news:Xns98F5B3B8D316Amco@xxxxxxxxxxxxxxxxx
> Greetings
> I have a 9412G panel installed in my place. I am considering getting a
> hold of a D9133DC module so I can hook it into my PC via a serial port for
> potential automation purposes in the future. I understand that not only
> can
> you use the serial port for reporting, you can also do arming, disarming,
> user management, reporting and some other cool stuff. I am want to know
> what kind of data I can get out of the serial port and how I need to do
> it.
> I called Bosch and they made it sound like they *might* give me the
> specifications on the protocols and commands to talk to the box if I
> jumped
> through some hoops. I want to know if anyone has the spec sheets floating
> around that I could borrow or just some insight on the box itself. I was
> also considering using an ethernet interface instead of a serial port, so
> the same questions apply for the DX4020 and the D9133-TTL-e modules. Any
> insight on automation with Bosch systems is appreciated too.
>
> thanks,
> Logan