Re: Everplex 4cq probs

["Noweldrecumbent" <noweldrecumbent2@xxxxxxxxxxx>]

Apparently this thing was damaged during delivery, they agreed to refund me
so I guess it's not a total loss.
Dave
"Frank Olson" <Use-the-email-links@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:LISqi.12704$_d2.11087@xxxxxxxxxxxx
> Noweldrecumbent wrote:
>> Yep a 12VDC 8 channel camera supply, it does nothing
>>
>> "Frank Olson" <Use-the-email-links@xxxxxxxxxxxxxxxxxxxxxx> wrote in
>> message news:mKNqi.11460$_d2.1545@xxxxxxxxxxxx
>>> Noweldrecumbent wrote:
>>>> I recently picked up a used 4 camera processor. I tried to power it up
>>>> using 12volts. Didn't notice any on switches other than the normal
>>>> sequence and program buttons. Should this at least light up when
>>>> applying dry power without cameras or monitor connected, it doesn't do
>>>> anything. Thanks
>>>> dave
>>> Did you try powering it up with the proper power supply?
>>
>>
>
>
> There are a number of reasons why it wouldn't respond.  You still haven't
> mentioned if you're using the power supply that came with the unit.
> Chances are (because you haven't mentioned it), you're not. Which means
> you're *assuming* the input required is 12VDC.  Then there's the matter of
> the adapter plug...  If you have the wrong polarity, you're liable to not
> get it to respond at all...