Re: protection

["Norm Mugford" <1alarm@xxxxxxxxxxxxx>]

What the hell you talkin about?
I think you have too many marbles on your keyboard?

BTW...Mike Holt is a very smart and well known guy.
He also supports his industry.......

Norm Mugford





"I brive a dus" <alarminstall@xxxxxxx> wrote in message
news:1169269878.398862.62500@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Mike Holt's site is excellent.

Robert L Bass wrote:
> > Most critical is that the earthing be single point.
> > Every incoming wire must earth to the same
> > earth ground.  Each structure must have its
> > own single point earthing...
>
> Very true.  If every incoming service on the structure is connected to a
> single point ground there is a significant reduction in
> damage from lightning.  This is particularly important for sensitive
> electronics such as security and home automation systems.
>
> Unfortunately, even when the installer correctly earth grounds the alarm,
> his system may still be unprotected if other tradesmen
> don't follow code.  In many areas the worst offender is the CATV company.
> They were notorious in New England and they still are in
> Florida for failing to ground at all, grounding improperly to metal
> siding, piggy backing onto the electric panel ground, etc.
>
> I routinely discuss bonded grounds with DIYers, especially on new
> construction.  Just as with propfessionally installed systems,
> other tradesmen are often at fault.  Most electricians get it right but
> plumbers, CATV and even some telco installers screw up.  I
> also noticed when I first brought the subject up in this newsgroup some
> years ago that some alarm techs are unaware of the
> importance of a bonded (aka single point) ground.
>
> On a related subject, it bears repeating that the panel ground needs to be
> as short as possible.  Bends in the ground cable should
> be radiused -- no hard 90 degree turns.  The best connection point it a
> ground rod sunk into the earth.  Never ground an alarm panel
> using an electrical outlet ground.  There are a few plug-in transformer
> which include a ground terminal.  Do NOT use that terminal.
> It will not provide proper protection for the alarm system's electronics.
>
> Mike Holt has useful information on grounding, bonding, etc., on his
> website at mikeholt.com.  Note that most of his information
> concerns safety grounding (keeping people alive) whereas the primary
> concern for alarm installation is protective grounding (keeping
> electronics alive).  Nonetheless, it's a very helpful website.
>
> --
>
> Regards,
> Robert L Bass
>
> =============================>
> Bass Home Electronics
> 941-866-1100
> 4883 Fallcrest Circle
> Sarasota · Florida · 34233
> http://www.bassburglaralarms.com
> =============================>



I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html