Re: Occupancy and Security PIR - Suggestions?

["Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx>]

i prefer glassbreaks in bedrooms set to perimeter zone type...that way you
could (if you had a keypad in master bedroom) arm all the system as long as
you stay in the bedrooms.


"E. Hill" <anybody@xxxxxxxxxxxx> wrote in message
news:4626b4c3$0$1428$4c368faf@xxxxxxxxxxxxxxxxx
| Hi,
|
| I'm looking for suggestions on PIR's for occupancy and security.
|
| http://www.capitationservices.com/floor.jpg
|
| Robert has already suggested the locations marked on the drawing. Napco
| PIR1680's on the inside, and Paradox DG85's on the outside and patio.
|
| Would the PIR1680's be a good choice for the bathrooms, too? Maybe a
Paradox
| 460 would be a better choice, right above the door?
|
| Instead of the 1680's, I was thinking about the DG75's. Draw about half
the
| current of the 1680's. But, the lookdown on the 1680 might work better for
| the halls.
|
| We normally keep the interior doors open... I'm concerned with somebody
| walking down the hall triggering the PIR's in the bedrooms. Is that a
| reasonable concern that can be addressed by adjusting the sensitivity?
|
| Thanks.
|
| Eric
|
|