[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Vista 50 + mva1000

Subject: Vista 50 + mva1000
From: "jabrams4@xxxxxxxxxxxxx" <jabrams4@xxxxxxxxxxxxx>
Date: 12 Apr 2007 14:30:08 -0700
Newsgroups: alt.security.alarms

Where should the 12 volt power lead from the Napco MVA1000 taking
siren driver bo connected to the Vista Panel.  On the Napco, you
connect it to the battery leads, but the Vista 50 has a 12 volt power
terminal.  Is the current at that point high enough to power the
driver with 4 speakers, or should I cannot that power lead directrly
(with a fuse) to the two paralleled batteries.  Of course the
triggering lead connects to the burg/fire terminals (pulse for fire).

Follow-Ups:
- Re: Vista 50 + mva1000
  - From: Robert L Bass

Prev by Message: Re: C & K 238 Programming Mode question
Next by Message: Re: reverse image on CCD Camera Prob
Previous by thread: Re: reverse image on CCD Camera Prob
Next by thread: Re: Vista 50 + mva1000
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home