[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: contact window

Subject: Re: contact window
From: "Don" <don@xxxxxx>
Date: Mon, 23 Oct 2006 13:44:29 -0400
Newsgroups: alt.security.alarms
References: <6V5%g.1836$N4.1279@xxxxxxxxxxxxxxxxxxxxxx> <453cf4e2$0$601$815e3792@xxxxxxxxxxxxxx>

"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:453cf4e2$0$601$815e3792@xxxxxxxxxxxxxxxxx
> with 3/8" stubbies with mini screw terminals, one contact up top one down
> at
> bottom, then the use the super donut magnets. The bottom magnet will be
> harder since you have the seal in the way, but you could probably get it
> in
> there vertically.

drill 3/8" hole straight up on the part of the window inside the seal.  hope
its thicker than it looks in that drawing.  The switch hole needed to match
the magnet looks a little tight on the inside going out the bottom of the
sill.

>
> They're gonna be a PITA...charge extra for this.

:(

Follow-Ups:
- Re: contact window
  - From: Crash Gordon

References:
- contact window
  - From: Don
- Re: contact window
  - From: Crash Gordon

Prev by Message: Veritas R8 old manual
Next by Message: Re: Disabling a Factory Car Alarm (1995 Toyota Corolla)
Previous by thread: Re: contact window
Next by thread: Re: contact window
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home