Re: default GE Simon installer code

["Turb0" <bcturb@xxxxxxxxx>]

Yeah its like some HUGE secret that the alarm co's want to bone you up
the hoop for a piddly service call.  This should work for a Simon 2 but
may work for a v1 and v3

Reset Memory to the Factory Defaults
If it becomes necessary to set all programming back
to the factory defaults, do the following:
1. Open the Control Panel cover.
2. Unplug the transformer and the battery.
3. Simultaneously press Cancel, Clock Set, and Minutes.
4. Restore power to the panel with either the battery
or the transformer while pressing these three buttons.
5. Plug in the transformer or connect the battery.
NOTE: If Phone Lock is on, options 04, 05, 06, 08, 09,
12, and 13 will not reset to their defaults.


Chub:
> can you panel hackers reset the Simon installer code?
> I have a commercial customer that purchased a house with one of these.
 I
> told him to contact original company to get code but if that fails I
would
> like to know what my options are.
> TIA