Re: contact window/ most used tool

["Don" <don@xxxxxx>]

oops, here is the link to ,

http://www.yourbroadbandstore.com/product.php?pid=209868


"Don" <don@xxxxxx> wrote in message
news:laM6h.52$sF.0@xxxxxxxxxxxxxxxxxxxxxxxxx
>
> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:453d293a$0$610$815e3792@xxxxxxxxxxxxxxxxx
>> I'd try a supermagnet first, looks like you have room to tuck one up
>> beside
>> the seal.
>    egzackly what I ended up with.  3/8" switchs with terminals.  No way to
> drill up for mag.  Not enough room.  Those drawings must not have been
> scale.  1/8" flat mag with the dst fit nicely in bottom sash on the inside
> edge of the notch for the seal,  lined up perfect with hole drilled just
> inside barrier down thru sill  to basement.  Ended up not as bad as I
> imagined.
>    Found these today .  Havent seen them in years, so ordered a couple.
> This is the single most used hand tool that I have had in my hand in the
> last 5 years.  Cutter, stripper and real b connector crimper out at the
> end of the tool.  Good for rough and finish work.  Any others?
>