[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Installalation Tips and Tools

Subject: Re: Installalation Tips and Tools
From: Rapid <nosp@xxxxx>
Date: Fri, 19 May 2006 10:40:31 -0400
Newsgroups: alt.security.alarms
References: <0kvag.5695$u4.464@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1147839256.364390.251410@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <PlNag.46$RV2.7484@xxxxxxxxxxxxxxx> <XE_ag.47762$Kn4.32902@xxxxxxxxxxxxxxxxxxxxxx> <1147970271.732525.29100@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Jason wrote:
> The proper tools is a very good tip that Bob had mentioned.. One thing
> I always find (working in card access)  is everyone using a #2 phillips
> screw driver for a #3 phillips screw and chewing the screws up.
>
> One tip I've got (again, card access) is if you need to install an
> electrified hinge in a wooden door frame and the screw holes are
> stripped out... stick a wooden golf tee into the hole, break it off and
> re-drill the hole. This works better than a dowel since the tee is
> tapered.
>
> jason
> http://jasonclick.com
>

excuse my ignorance but what is an electrified hinge?

Follow-Ups:
- Re: Installalation Tips and Tools
  - From: G . Morgan
- Re: Installalation Tips and Tools
  - From: Jason

References:
- Installalation Tips and Tools
  - From: bdolph
- Re: Installalation Tips and Tools
  - From: Everywhere Man
- Re: Installalation Tips and Tools
  - From: Crash Gordon
- Re: Installalation Tips and Tools
  - From: Bob Worthy
- Re: Installalation Tips and Tools
  - From: Jason

Prev by Message: Re: Bob LaLonde and/or Bob Campbell
Next by Message: OT: For "JS"
Previous by thread: Re: Installalation Tips and Tools
Next by thread: Re: Installalation Tips and Tools
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home