[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC 832 Panel CON1 Jumper Location?

Subject: Re: DSC 832 Panel CON1 Jumper Location?
From: "alarman" <alarman2000@xxxxxxxxx>
Date: Tue, 7 Mar 2006 20:18:53 -0800
Newsgroups: alt.security.alarms
References: <a0nPf.1133$k75.162@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <ifqPf.1317$fL3.752@fed1read01> <i9rPf.8286$S25.1250@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> <dvfs02tkpkqu2799j9mh8l7521skkdive9@xxxxxxx>

"Robert L Bass" <sales@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:dvfs02tkpkqu2799j9mh8l7521skkdive9@xxxxxxxxxx
> > The DSC documentation sure leaves a lot to be desired...
>
> Indeed, along with quality control, dealer service, etc.

With few exceptions, and given the amount of  DSC I use, I have had very
little trouble with it. Certainly no more than with any other brand.

Since you do not install yourself, I take it your observation is based on
the experiences of your DIY diciples. Perhaps they are challenged in some
way.
js

References:
- DSC 832 Panel CON1 Jumper Location?
  - From: Mike Schumann
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: alarman
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: Mike Schumann
- Re: DSC 832 Panel CON1 Jumper Location?
  - From: Robert L Bass

Prev by Message: Re: Napco
Next by Message: Re: Distance between alarm panel and keypad question
Previous by thread: Re: DSC 832 Panel CON1 Jumper Location?
Next by thread: Re: DSC 832 Panel CON1 Jumper Location?
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home