Re: DSC-Cross Zone Police Code Alarm PROBLEM

["Dana Wiegner" <dana.wiegner@xxxxxxxxxxx>]

As I work at a station and I know that there software needs to be configured
to see what you are sending.

Also, what reporting format are you sending in?  try changing to automatic
sia and advised your station and then test.


"alarman" <alarman2000@xxxxxxxxx> wrote in message
news:6N5kg.104487$iU2.62146@xxxxxxxxxxxxx
> I don't use contact ID much, but yes, the message should show up in
English.
> Mark Leuck will know.
> js
> <oldmantrying@xxxxxxxxxxx> wrote in message
> news:9ue192pa007boh66uh7a3968da4eh5pi5h@xxxxxxxxxx
> > YES. You are correct the board appends a "1" on the front of the 4A,
> > but the central station said they did not get anything for cross zone.
> > But..I shall test again and ask them again to look carefully for a 14A
> > or a 4A or a 140..but shouldn't they see and English string for the
> > code too?
> >
> > THANKS
> >
> > On Wed, 14 Jun 2006 17:27:30 -0700, "alarman" <alarman2000@xxxxxxxxx>
> > wrote:
> >
> >>If you programmed a 4A into the cross zone police code reporting slot,
and
> >>your panel is set to transmit contact ID, the central station will
receive
> >>a
> >>"14A" or possibly a "140"
> >>js
> >>
> >><OldManTrying@xxxxxxxxxxx> wrote in message
> >>news:iro092tj73ed1vjopphfur0r91fa6ab1tg@xxxxxxxxxx
> >>> This old man needs help from an expert-I'm stumped.
> >>> I have a 1 1/2 year old self installed/programmed-DSC 832 System. The
> >>> Board is labeled 50/300. Thus far everything seems to work fine
> >>> except:
> >>>
> >>> In my residence I wish to use the Cross Zone Police Code feature to
> >>> reduce FALSE ALARMS from a single zone. I have programmed
> >>> [328]Miscellaneous Alarm Reporting Codes, Option #6 Cross Zone Police
> >>> Code Alarm as "4A".
> >>>
> >>> Today I did 3 tests.The  central station got alarms for both the entry
> >>> zones &  the MIR zones correctly but did not receive the 4A code.
> >>>
> >>> Typically I would want them to dispatch police after intruder violates
> >>> a perimeter/entry zone and an interior MIR (or less likely 2
> >>> perimeter/entry type zones) The Cross Zone Police Code Alarm  seems
> >>> perfect for doing that. They would dispatch if "4A" is received & they
> >>> could not contact us by phone.
> >>>
> >>> FYI, I use my LCD keypad for programming and have tripled checked that
> >>> [328] option #6 is "4a". HELP PLEASE. THANKS
> >>
>
>