Re: NX4

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Sounds like somethings different between the euro version and the US
although I still doubt it

"Chub" <w@xxxxx> wrote in message
news:hUUAf.7198$C%3.4580@xxxxxxxxxxxxxxxxxxxxxxxxx
>
> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
> news:p6udnehELpPaiUneRVn-rg@xxxxxxxxxxxxxx
> > You can zone double the NX series regardless of what modules you have
> > attached to it
>
> even NX4?
>
> pasted from pdf from GE site manual:
> Zone doubling can only be enabled when at least one other device is added
to
> the basic system (consisting of the main control panel
>
> and one keypad). Additional devices can include wireless receivers, extra
> keypads, etc. If enabled, this feature allows you to use the
>
> four zones on the panel as eight normally closed zones. When this feature
is
> used, European double E.O.L. configuration cannot be
>
> used.. THIS FEATURE DOES NOT INCREASE THE TOTAL NUMBER OF AVAILABLE ZONES
> BEYOND 8. If one of the eight
>
> zones must be a fire zone, it must be one of Zones 1 to 4. The
corresponding
> upper zone will become unavailable. For example: if
>
> Zone 4 is a fire zone, then Zone 8 will not be available. (Loc 37, pg 17)
>
> Zone Types (Configurations)
>
> The NX-4V2 has 30 programmable Zone Types that determine how each zone
will
> function and report.
>
>
>
> better check into it you don't want a bunch of customers out there that
are
> not being protected on the 2nd zoneset and not know it.
>
>
>