Re: NX4

["Chub" <w@xxxxx>]

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:p6udnehELpPaiUneRVn-rg@xxxxxxxxxxxxxx
> You can zone double the NX series regardless of what modules you have
> attached to it

even NX4?

pasted from pdf from GE site manual:
Zone doubling can only be enabled when at least one other device is added to
the basic system (consisting of the main control panel

and one keypad). Additional devices can include wireless receivers, extra
keypads, etc. If enabled, this feature allows you to use the

four zones on the panel as eight normally closed zones. When this feature is
used, European double E.O.L. configuration cannot be

used.. THIS FEATURE DOES NOT INCREASE THE TOTAL NUMBER OF AVAILABLE ZONES
BEYOND 8. If one of the eight

zones must be a fire zone, it must be one of Zones 1 to 4. The corresponding
upper zone will become unavailable. For example: if

Zone 4 is a fire zone, then Zone 8 will not be available. (Loc 37, pg 17)

Zone Types (Configurations)

The NX-4V2 has 30 programmable Zone Types that determine how each zone will
function and report.



better check into it you don't want a bunch of customers out there that are
not being protected on the 2nd zoneset and not know it.