Re: DSC PC 1550 Beeping

["Doug L" <vssdoug@xxxxxxx>]

I don't think the 500 keypad is compatible with the 1550

I believe that any keypad for the 1500/1550/2500/2550/3000 series of panels
is more or less interchangeable.

If the 500 keypad will work with any other panel its more likely to be the
1575 or possibly the 1555/5010 series.

Unless you are on a really tight budget I wouldn't even look for a
replacement keypad, just buy a new 1555 & keypad and be done with it, if you
are on a tight budget you may have more luck looking for a used PC500 board
rather than a 1500/1550 keypad..

Doug L
--

<warrenshudson@xxxxxxxxx> wrote in message
news:1138158013.213528.292490@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I am trying to install and program a pc 1550, and when the unit is
> powered up, the keypad will beep.  I have been told the keypad I am
> using is compatible, but I am not so sure.  The panel is a pc 1500 rev
> 4m, and the keypad is a pc5000rk.  The keypad is a 4 zone, but I only
> need 4 zones on the panel.  I am trying to get into program mode, and I
> have done a hard reset, but I am not sure what to do here, any
> knowledge would be great.
>