[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: 6270 touch screen



thanks Mark . you were right...
"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:W82dnZvJYIvV213eRVn-rg@xxxxxxxxxxxxxx
>
> "Jon Aichberger" <jon.aich@xxxxxxxxxxx> wrote in message
> news:WaPuf.169958$V7.19228@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> hi all techs.
>> Im having a problem with ademco's touch screen 6270. after about 3 weeks
> of
>> running  the client cant arm on the first attempt the message "unable to
> arm
>> all partitions" comes up. The 6270 has been available in the australian
>> market for 5 months and i understand that the US has had them for
>> considerably longer.
>> im wondering if this is an australian only problem or global.
>> The only solution i can find is to power the whole system down and
>> re-boot
>> but then it reappears weeks later. Any help / advice would be appreciated
> as
>> Ademco Aust. just come back with "they are investigating it".
>
> Check the programming of the panel, that message isn't caused by the
> keypad
>
>




alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home