[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Electromagnetic lock wiring

Subject: Re: Electromagnetic lock wiring
From: Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Sun, 12 Feb 2006 23:28:33 -0300
Newsgroups: alt.security.alarms
References: <1139622680.040769.74080@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <4595f9F5fp81U1@xxxxxxxxxxxxxx>

> The NC, common and No terminals probably go to a
> "tamper switch" which activates when the cover is
> removed...

Probably so.  They also might go to a lock status sensor that
tells a control panel whether the lock is engaged.  These, tamper
switches, door status sensors, etc., are all available options on
many magnetic locks.

--

Regards,
Robert L Bass

Bass Burglar Alarms
The Online DIY Store
http://www.BassBurglarAlarms.com

References:
- Electromagnetic lock wiring
  - From: sam
- Re: Electromagnetic lock wiring
  - From: Bill

Prev by Message: Re: EOL's
Next by Message: Re: Where does one buy the plastic/glass rods that are a part of a fire alarm?
Previous by thread: Re: Electromagnetic lock wiring
Next by thread: Re: Electromagnetic lock wiring
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home