Re: System Sensor/DSC problem

["R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx>]

Frank, the panels I use (DSC and Paradox) supervise the siren loop as a
normal course of action. I'm curious, how does adding the resistor assist
matters (other than for the example problem being discussed....)

RHC

"Frank Olson" <Use_the_email_links@xxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:TXnFf.333783$tl.134109@xxxxxxxxxxx
> R.H.Campbell wrote:
>> Sometimes when wierd things happen like that on a panel, where the siren
>> seems to be "squealing" at a low voluem continuously, the noise can be
>> muted by putting a 1K Ohm resistor across the siren output leads....
>>
>> Worth a try !
>
> I'll add one little thing.  If you want to supervise the wiring to the
> siren, put the 1000 ohm resistor across the leads *at the siren* (and not
> at the panel).


I choose Polesoft Lockspam to fight spam, and you?
http://www.polesoft.com/refer.html