[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help with Fire Fault on Ademco Lynx-R

Subject: Re: Help with Fire Fault on Ademco Lynx-R
From: "Don" <don@xxxxxx>
Date: Thu, 21 Dec 2006 21:24:38 -0500
Newsgroups: alt.security.alarms
References: <w9adnVyleb7BihbYnZ2dnUVZ_s6onZ2d@xxxxxxxxxxxx> <FUEih.6386$cB6.2766@xxxxxxxxxxxxxxxxxxxxxx> <a2Fih.6389$cB6.857@xxxxxxxxxxxxxxxxxxxxxx> <b4GdnYJbl-z_gxbYnZ2dnUVZ_qemnZ2d@xxxxxxxxxxxx> <tcFih.6394$cB6.4096@xxxxxxxxxxxxxxxxxxxxxx> <KrmdnRO7W5kDvRbYnZ2dnUVZ_tGsnZ2d@xxxxxxxxxxxx>

"Jack" <jack@xxxxxxxxxxxxx> wrote in message
news:KrmdnRO7W5kDvRbYnZ2dnUVZ_tGsnZ2d@xxxxxxxxxxxxxxx
>>
> My mistake. I meant to say I did remove the battery from the heat
> "transmitter". By the way, after arming the device in Stay Mode with the
> battery removed from the transmitter, it echoes back "Armed Stay Exit Now
> .... Then about 15 seconds later without me doing anything, it says Armed
> Stay, Check System".
>



where'd you come up with arming and disarming with the battery out?
Troll maybe?

References:
- Help with Fire Fault on Ademco Lynx-R
  - From: Jack
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Don
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Don
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Jack
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Don
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Jack

Prev by Message: Re: Old Motion Detector
Next by Message: Re: Old Motion Detector
Previous by thread: Re: Help with Fire Fault on Ademco Lynx-R
Next by thread: Re: Help with Fire Fault on Ademco Lynx-R
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home