[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Help with Fire Fault on Ademco Lynx-R

Subject: Re: Help with Fire Fault on Ademco Lynx-R
From: "Don" <don@xxxxxx>
Date: Thu, 21 Dec 2006 18:58:20 -0500
Newsgroups: alt.security.alarms
References: <w9adnVyleb7BihbYnZ2dnUVZ_s6onZ2d@xxxxxxxxxxxx> <FUEih.6386$cB6.2766@xxxxxxxxxxxxxxxxxxxxxx> <a2Fih.6389$cB6.857@xxxxxxxxxxxxxxxxxxxxxx> <b4GdnYJbl-z_gxbYnZ2dnUVZ_qemnZ2d@xxxxxxxxxxxx>

"Jack" <jack@xxxxxxxxxxxxx> wrote in message
news:b4GdnYJbl-z_gxbYnZ2dnUVZ_qemnZ2d@xxxxxxxxxxxxxxx
> With the battery removed from the reciever,

reciever??
the heat is a transmitter.
remove battery from heat, let sit for a few minutes, put in new battery,
then arm and disarm panel.




> I disarmed the system and the
> response back from the panel is Disarm, Check  System, Ready to Arm. But
> there is still an error message on the panel regarding Zone 20 Fire Fault.
>
>

Follow-Ups:
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Jack

References:
- Help with Fire Fault on Ademco Lynx-R
  - From: Jack
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Don
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Don
- Re: Help with Fire Fault on Ademco Lynx-R
  - From: Jack

Prev by Message: Re: Help with Fire Fault on Ademco Lynx-R
Next by Message: Re: Help with Fire Fault on Ademco Lynx-R
Previous by thread: Re: Help with Fire Fault on Ademco Lynx-R
Next by thread: Re: Help with Fire Fault on Ademco Lynx-R
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home