Re: Napco MA-3000 Fire Bell Trouble warning upon power-up.

[secure15 <secure15@xxxxxxxxxxxxx>]

homeautomashun@xxxxxxxxx wrote:
> Thanks All for your suggestions...
>
> As it turned out the wrong default program was loaded. The install
> manual suggests loading from address 3072, then at the top of pg.11
> (for those who are following along at home) it states:
>
> "12. ...the panel is now programmed with the burglary default program
> and the system trouble 'NO PANEL PROGRAM' should be cleared."
>
> the reality is that address 3072 loads the *fire* default program.
> (3071 loads the burg default). This typo appears in the WI588A 7/93
> that came with the board (new 2 weeks ago). I figured this out when
> refering to the WI785B 10/96, which correctly mentions loading from
> address 3071... prob solved no more a Fire Bell System Trouble.
>
> ...so I guess it was a case of installer error (my error) ... and I
> guess Napco Panels aren't as difficult to program as people say...
> (actually they still are!!!)
>
> Anyway thanks again for your replies
>
No- they're difficult for those who don't understand programming them.