[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: DSC 1575 : trouble light for AC power stays on
Does your replacement transformer have the right voltage and wattage? A 12
VA transformer, for instance, won't do. Also, you may want to measure the
voltage at the input terminals.
"gjertsen" <gjertsen@xxxxxxxxxx> wrote in message
news:1144947817.491857.136430@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I've been troubleshooting this DSC 1575 system for my wife's house.
> The system had been dead for quite a while when I looked at it, so I
> replaced the battery first. Then I replaced the transformer (no
> continuity on the output terminals) and the system powered up
> OK.
>
> I had to reset the system clock to turn off one trouble code.
> The problem is that the trouble light stays on and indicates
> another trouble code: AC power loss (get a 2 after "* 2" sequence).
> I'm trying to figure out if there is a reset/clear that I need to do,
> or if perhaps there are other issues here. I removed the battery
> temporarily for a quick sanity check and the system was
> definitely getting power. Any pointers?
>
> Thanks,
>
> --Rob
>
alt.security.alarms Main Index |
alt.security.alarms Thread Index |
alt.security.alarms Home |
Archives Home