Re: Help installing a Paradox Digiplex DGP-848 with DGP2-641BL keypad

["R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx>]

Sir, you have chosen quite a sophisticated panel to install. I suspect you
will definately need some help and guidance to program this baby from
someone familiar with the system.

No, you don't need EOL's to make the system work. They will however give you
a measure of extra protection against line tampering or failure.

BTW, this panel will not recognize any zone inputs until they are programmed
in.

R.H.Campbell
Home Security Metal Products
Ottawa, Ontario, Canada
www.homemetal.com


"julian" <julian@xxxxxxxxxxxxxxx> wrote in message
news:dhpb32hftvsa6idl3plbar8acctedd0r3u@xxxxxxxxxx
> RTFM.
>
>
> On 28 Mar 2006 21:51:05 -0800, smitjj@xxxxxxxxx wrote:
>
>>Hi there,
>>
>>Can anybody please assit me with the necessary steps to start off with
>>to install this alarm system?
>>
>>I'm making use of hardwired passives to the zone inputs. Thus only my
>>keypad is on the comms bus, the rest is on the zone inputs 1 to 8. One
>>passive per zone.
>>
>>I'm unsure if EOL resistors are needed on the passives, and the
>>procedure to program the system.
>>
>>Regards
>>
>>Johan
>