Re: DSC Escort 5580TC

["Robert L Bass" <robertlbass@xxxxxxxxxxx>]

How old is the Escort module?  If it's under warranty return it.  DSC is
pretty good about that.  If your dealer won't help, contact me.  I'll get it
fixed or replaced for you.

--

Regards,
Robert L Bass

=============================>
Bass Home Electronics
2291 Pine View Circle
Sarasota · Florida · 34231
941-925-9747 Sales & Tech Support
http://www.bassburglaralarms.com
=============================>



Kevin wrote:

> Hello group.
>
> I am using a DSC 864 W/a DSC 5580TC Escort Module with home automation
> enabled. For the X-10 control the 5580 is connected to a X10 one-way
> interface module. I have multiple x-10 devices around the home and rely on
> "Home control assistant" to handle automation tasks. The X-10 system works
> flawlessly as I have several filters a couple of boosterlincs and a Signal
> bridge between phases. I never have a problem getting signals to any
> devices with the exception of the interface module connected to the
> 864/5580. It will work well for several days and then appears to send out
> "Garbage" Or will operate intermittently. If I unplug the interface it
> will
> seem to correct the problem(s) for another day or two and then start
> operating improperly again. I was curious if anyone else has had similar
> problems? I realize X-10 is considered very unreliable, But I have had
> very
> few problems with my current setup. I should also mention I have tried to
> relocate the one-way interface to several different AC Loactions with the
> same results. Thanks in advance for any input anyone has to offer.