DSC Escort 5580TC

[Kevin <Spiritbranson@xxxxxxxxxxxxx>]

Hello group.

I am using a DSC 864 W/a DSC 5580TC Escort Module with home automation
enabled. For the X-10 control the 5580 is connected to a X10 one-way
interface module. I have multiple x-10 devices around the home and rely on
"Home control assistant" to handle automation tasks. The X-10 system works
flawlessly as I have several filters a couple of boosterlincs and a Signal
bridge between phases. I never have a problem getting signals to any
devices with the exception of the interface module connected to the
864/5580. It will work well for several days and then appears to send out
"Garbage" Or will operate intermittently. If I unplug the interface it will
seem to correct the problem(s) for another day or two and then start
operating improperly again. I was curious if anyone else has had similar
problems? I realize X-10 is considered very unreliable, But I have had very
few problems with my current setup. I should also mention I have tried to
relocate the one-way interface to several different AC Loactions with the
same results. Thanks in advance for any input anyone has to offer.