[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: FCI 7100

Subject: Re: FCI 7100
From: manny <makusafe@xxxxxxx>
Date: Wed, 07 Sep 2005 23:29:16 -0500
Newsgroups: alt.security.alarms
References: <LTDTe.7452$4i6.2707@xxxxxxxxxxxxxxxxxxxxxxx> <lueuh1dltrbfjm3no5rsn000kpvjqd7jpe@xxxxxxx> <feydnYGN3JyHHYLeRVn-pA@xxxxxxxxxx>

None of these people no the problem, as none of the are dealers for FCI, I
have been dealing with this issue for almost two years, some panels just
lock up with a comm error, the problem is with the dialer part of the
Panel,

The FCI 7100 has a seriuos problems with firmware, when using the built in
DACT. Check to see what revision you running, the latest release is 6.3 for
the main eprom.
I recommend you get the dealer to replace the Panel or upgrade you revision
to 6.3

Follow-Ups:
- Re: FCI 7100
  - From: Jim Rojas

References:
- FCI 7100
  - From: Richard Merriam
- Re: FCI 7100
  - From: Robert L Bass
- Re: FCI 7100
  - From: mikey

Prev by Message: Re: Paying customer wakes up to CF alarm every morning
Next by Message: Re: Another inept Bush pal leaves FEMA
Previous by thread: Re: FCI 7100
Next by thread: Re: FCI 7100
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home