Re: need help with Northern N-1000-IV panel

["alex rogozin" <arogozin at comcast period net>]

i did buffer, unbuffer, initialize, re-created databases and created new
ones as described in described order.
from "Panel Control" relay energizes, de-energizes, pulses fine.
the readers i use are HID  ProxPro 2, cards are 5 digit HID. The reader
board pulses as described during card read. "reverse LED" under panel -
readers does not work.
reader issue ? my next step is to get mag reader and try that one.
If someone could post or email working backup of the system i could also try
that approach.

Thanks to all reading this and trying to help.
Regards,
Alex



"petem" <petem001@xxxxxxxxx> wrote in message
news:l0W3f.22724$Tn2.456984@xxxxxxxxxxxxxxxxxxxxxx
> did he unbuffer the panel at log on?
>
>
> "alex rogozin" <arogozin at comcast period net> a écrit dans le message de
> news: 0v-dnZzls4MQntLeRVn-iQ@xxxxxxxxxxxxxx
>> I'm not even getting invalid card reads - bad panel ?
>>
>>
>> "Jackcsg" <nospam@xxxxxxxxxx> wrote in message
>> news:us2dneOkWeItJdreRVn-vw@xxxxxxxxxxxxxxx
>>> Check your Time Zones. Sounds like you're getting invalid card reads.
>>>
>>> "alex rogozin" <arogozin at comcast period net> wrote in message
>>> news:6YednXO5GeB-XdjeRVn-rg@xxxxxxxxxxxxxx
>>>> need help with setting up 1000-4 panel - v8.02 win-pak 1.17 connected
>>>> through serial, HID prox receiver, HID cards.
>>>> created databases, did everything by the manual ( or maybe missed
>>>> something ) - panel control works fine, relays energize, panel appear
>>>> to
>>>> work. On card read green light on the 4-reader board goes steady for
>>>> 1/2
>>> sec
>>>> as described - no messaged in win-pak and no relay action - what did i
>>> miss
>>>> ?
>>>> Any help appreciated.
>>>> Also - will any RS232 to RS485 converters work or i must get Northern
>>> C-100
>>>> or N-485 ?
>>>>
>>>> Regards,
>>>> Alex
>>>>
>>>>
>>>
>>>
>>
>>
>
>