[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: To catch a thief, Advice needed

Subject: Re: To catch a thief, Advice needed
From: cctvbahamas@xxxxxxxxxxx
Date: 3 Oct 2005 22:15:08 -0700
Newsgroups: alt.security.alarms
References: <1128309475.064414.147020@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1128312040.406627.192310@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <xIydnWLTVJ6Qz9zeRVn-pA@xxxxxxxxxxxx> <1128354587.449631.238430@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <1128364865.970240.51950@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Just get the lens kit and you can change them if needed. 4 or 6 mm
would probably do once you dont need the whole room. Also depends where
you are mounting the camera and the distance from the camera to the
view area, and width of the view area. (FOV)

Color is nice, but if you are unsure of the lighting level then you
would best with BW.

The VDR can use regular IDE drives, the slower the better. Unformated
also, dont do anything with them.

References:
- To catch a thief, Advice needed
  - From: Dave
- Re: To catch a thief, Advice needed
  - From: cctvbahamas
- Re: To catch a thief, Advice needed
  - From: Bob La Londe
- Re: To catch a thief, Advice needed
  - From: cctvbahamas
- Re: To catch a thief, Advice needed
  - From: Dave

Prev by Message: Re: Problem enrolling Receiver section of RF5501-433NA Keypad
Next by Message: Video Monitoring Software
Previous by thread: Re: To catch a thief, Advice needed
Next by thread: Re: To catch a thief, Advice needed
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home