[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC PC1565

Subject: Re: DSC PC1565
From: "Jim Rojas" <jrojas@xxxxxxxxxxxx>
Date: Sat, 22 Oct 2005 13:55:22 GMT
Newsgroups: alt.security.alarms
References: <4358f09e$1_1@xxxxxxxxxxxxxxxxxxx> <gn76f.38$Io4.8@trnddc06> <S_udnfY0-uXDjsfeRVn-sA@xxxxxxxxxxx>

All that is required is to remove any wires on PGM1 & Z1 before you try it.

Jim Rojas


"Armond Perretta" <newsgroupreader@xxxxxxxxxxxxxxxxx> wrote in message
news:S_udnfY0-uXDjsfeRVn-sA@xxxxxxxxxxxxxx
> Jim Rojas wrote:
>> I can unlock it. You will have to send me the board. There is no
>> magic trick unless you already tried the PGM1 to Z1 method.
>
> I had mixed results with this trick until I removed all the wires from the
> main board (except the battery, one keypad, and the AC).  Is it usually
> necessary to go this far?
>
> --
> Good luck and good sailing.
> s/v Kerry Deare of Barnegat
> http://home.comcast.net/~kerrydeare
>
>
>
>

References:
- DSC PC1565
  - From: Communications
- Re: DSC PC1565
  - From: Jim Rojas
- Re: DSC PC1565
  - From: Armond Perretta

Prev by Message: Re: need help with Northern N-1000-IV panel
Next by Message: Re: Saw spider crawl into control box!
Previous by thread: Re: DSC PC1565
Next by thread: Re: DSC PC1565
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home