Re: DSC Maxsys PC 4020 Reporting probs.

["Anonymoose" <none@xxxxxxxxxxxxx>]

No nothing of the sort. this panel is on its own line specifically dedicated
to it.

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:buKdncLMmuw7Yu7fRVn-uA@xxxxxxxxxxxxxx
> Does the customer have DSL or voice over IP?
>
> "Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
> news:NuPce.540$Q.524@xxxxxxxxxxxxxxxxxxxxxxxxx
>> Yep, replaced the whole board (panel)
>>
>> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
>> news:xOKdnaiIXLDGh-7fRVn-pQ@xxxxxxxxxxxxxx
>> >
>> > "Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
>> > news:YwDce.59$i1.40@xxxxxxxxxxxxxxxxxxxxxxxxx
>> >> "Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
>> >> news:uNGdnc6hS6YxbO_fRVn-tg@xxxxxxxxxxxxxx
>> >> >
>> >> > It should work fine unless you have bad phone lines, a screwed up
> panel
>> >> > communicator or bad receiver
>> >> >
>> >> Heres what I've done:
>> >> > 1. I've replaced the board, left all zone devices off
>> >> > 2. I've tested & changed the phone line to another # and cable
>> >> > 3. I've deleted all programming and left only phone #1 active
>> >> > 4. I've changed power supplies
>> >> > 5. I've dabbled in programming changing subtle settings.
>> >> > None of these work.
>> >
>> > Have you tried another panel?
>> >
>> >
>>
>>
>
>