[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE

Subject: Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE
From: "Jim Rojas" <jrojas@xxxxxxxxxxxx>
Date: Mon, 02 May 2005 18:38:26 GMT
Newsgroups: alt.security.alarms
References: <VXtde.1938$9n1.27@xxxxxxxxxxxxxxxxxxxxxx>

I usually insert all the report codes manually for each zone, etc. DSC is
aware of the problem.

Jim Rojas

"Anonymoose" <none@xxxxxxxxxxxxx> wrote in message
news:VXtde.1938$9n1.27@xxxxxxxxxxxxxxxxxxxxxxxxx
> Now this was odd, I worked on that panel today and poked around in the
> programming (from the keypad) and saw that Auto Report SIA was off so I
> turned it on and it works now. And I'm not even using SIA. Anyway, try
> this if any of you encounter this problem. Thanks for all your replies and
> suggestions.
>

Follow-Ups:
- Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE
  - From: Mark Leuck
- Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE
  - From: Robert L. Bass

References:
- DSC Maxsys PC 4020 Reporting Probs. UPDATE
  - From: Anonymoose

Prev by Message: VCR
Next by Message: Re: Seeking The Best DIY Alarm Consultant
Previous by thread: DSC Maxsys PC 4020 Reporting Probs. UPDATE
Next by thread: Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home