Re: DSC Maxsys PC 4020 Reporting Probs. UPDATE

["Group Moderator" <GroupModerator@xxxxxxxxxxx>]

"Mark Leuck" <m..leuck@xxxxxxxxxxx> wrote in message
news:oKCdnQ_Ej6MBO-vfRVn-rg@xxxxxxxxxxxxxx
>
> "Robert L. Bass" <robertlbass@xxxxxxxxxxx> wrote in message
> news:YoGdnd1KpYJhP-vfRVn-ig@xxxxxxxxxxxxxx
>> > Now this was odd, I worked on that panel today
>> > and poked around in the programming (from the
>> > keypad) and saw that Auto Report SIA was off
>> > so I turned it on and it works now. And I'm not
>> > even using SIA. Anyway, try this if any of you
>> > encounter this problem. Thanks for all your replies and suggestions.
>>
>> Hmm.  It was a programming issue after all.  As I suggested earlier, you
>> needed to enter the codes.  Glad you didn't waste several thousand
>> dollars
>> following Leuck's advice.  Just for the heck of it, next time you're out
> at
>> the site, restore it to Contact ID and enter the reporting codes.  It
> should
>> work fine.
>
> Try reading the post this time, he's not using SIA now, he's sending to an
> Ademco 685 receiver which doesn't support it


Mike Said:
Baaaaaam Boooooooooooooooomm ROUND 2 Leuck Vs Bass TKO in the 2nd DSC match.
Bass don't even know if his ass is punched or drilled and you want him to
know DSC

--
http://www.AlarmSuperStore.com
"Your One Stop Alarm Shop"