Re: ? PC1550 V4.0

[Crash Gordon® <NONE@xxxxxxxx>]

Dang I hate old formats...life is so much easier with CID or SIA or SDLC

Thanks for refreshing my brain on the powerup thingie.

Rob


"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message =
news:cYudnY_lqdp1INTfRVn-jw@xxxxxxxxxxxxx
> No, only the older formats such as 3/1 and 4/2. This panel was brought =
out=20
> somewhere around the early '90's.
>=20
> Ok, power up with AC only and listen at the board. If you hear a =
series of=20
> quickly spaced clicks, that indicates that the panel is locked. If no=20
> clicking, then power down, put a jumper on the "reset" pins, power up, =
wait=20
> about 15 seconds and remove the jumper. You can then get into =
installer=20
> programming with *8, 1500 or 1550....
>=20
> RHC
>=20
> "Crash Gordon=AE" <NONE@xxxxxxxx> wrote in message=20
> news:tlh2e.17$Mq2.640@xxxxxxxxxxxxxxxxxx
> I haven't worked on one of these in a while...
>=20
> 1- No CID or SIA reporting on these puppies?
>=20
> 2- How old is this panel (approx)?
>=20
> 3- I don't know the installer or master code (new homeowner - old =
alarm=20
> company out of biz). Default codes have been changed. I forget the =
procedure=20
> to tell if it's locked or not...the chattering relay thing. Please =
refresh=20
> me memory.
>=20
>=20
> Tnx,
>=20
>=20
>=20
>=20
>=20
>