Re: ? PC1550 V4.0

[Crash Gordon® <NONE@xxxxxxxx>]

It was locked.

Gonna pop in a Vista10P Saturday. Then have a DSC BBQ with the old panel =
I guess.


"R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message =
news:64CdnSeSD-NHkNffRVn-sA@xxxxxxxxxxxxx
> When you default, the installers code goes back as well to 1500 or =
1550,
> unless it's locked, then everything except the installer code goes =
back to
> factory, and you're still locked out..
>=20
> RHC
>=20
> "Crash Gordon=AE" <NONE@xxxxxxxx> wrote in message
> news:iQn2e.1317$nb3.2134@xxxxxxxxxxxxxxxxxx
> Does the reset thing reset the progammers code to default or will I =
still
> need to have the installer code to get into programming?
>=20
> I have a feeling it's locked and I'm wasting my time...but a takeover =
is
> bucks in me pocket..with only little effort (better than crawling =
attics).
>=20
>=20
>=20
> "R.H.Campbell" <rh.campbell@xxxxxxxxxxxxx> wrote in message
> news:cYudnY_lqdp1INTfRVn-jw@xxxxxxxxxxxxx
> > No, only the older formats such as 3/1 and 4/2. This panel was =
brought out
> > somewhere around the early '90's.
> >
> > Ok, power up with AC only and listen at the board. If you hear a =
series of
> > quickly spaced clicks, that indicates that the panel is locked. If =
no
> > clicking, then power down, put a jumper on the "reset" pins, power =
up,
> > wait
> > about 15 seconds and remove the jumper. You can then get into =
installer
> > programming with *8, 1500 or 1550....
> >
> > RHC
> >
> > "Crash Gordon=AE" <NONE@xxxxxxxx> wrote in message
> > news:tlh2e.17$Mq2.640@xxxxxxxxxxxxxxxxxx
> > I haven't worked on one of these in a while...
> >
> > 1- No CID or SIA reporting on these puppies?
> >
> > 2- How old is this panel (approx)?
> >
> > 3- I don't know the installer or master code (new homeowner - old =
alarm
> > company out of biz). Default codes have been changed. I forget the
> > procedure
> > to tell if it's locked or not...the chattering relay thing. Please =
refresh
> > me memory.
> >
> >
> > Tnx,
> >
> >
> >
> >
> >
> >
>=20
>=20
>