Re: Ademco Vista-20P problems

["Mark Leuck" <m..leuck@xxxxxxxxxxx>]

Is the house code properly programmed in both panel and keyfob?

<eug@xxxxxxxxxxx> wrote in message
news:1117682514.050599.261970@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> I haven't climbed up to where the 5883H is mounted to check the dip
> switch, but I also neglected to mention that I also have a 5839
> wireless bidirectional keypad installed, and that displays status from
> the panel, so that would imply that the dip switch is set correctly.
>
> Mark Leuck wrote:
> > <eug@xxxxxxxxxxx> wrote in message
> > news:1117565947.837804.262800@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > > Mark Leuck wrote:
> > > > What receiver do you have?
> > >
> > > 5883H transceiver.
> > >
> > > > It doesn't sound like you have the X-10 programmed correctly
> > >
> > > Well, that's what I'm hoping, rather than it being an oversight in the
> > > 20P's software, but the zone number-triggered functions work fine when
> > > the system is disarmed.  I can't find anything in the documentation
> > > about that sort of distinction.
> >
> > Make sure dip switch 6 on the receiver is ON, that should cure the
5804BD
>