Re: vista 15pmt

["Jim Rojas" <jrojas@xxxxxxxxxxxx>]

I think ADT doesn't do anything special to the keypads. Just peel off the
ADT label or place your own on top of it.

I have an off the shelf Vista20P in my home with (2) Safewatch Pro 2000 ADT
keypads...My wife likes the big buttons.

Jim Rojas



"Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:SCsGe.12$HV3.2209@xxxxxxxxxxxxxxxxxx
> on the adt takeovers i didnt use the adt keypads anyway.
>
>
> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
> news:CbiGe.8282$wA1.7018@xxxxxxxxxxx
>> Same with First Alert & Guardian versions. Please keep in mind that you
>> must also replace keypad or the firmware inside the keypad as well.
>>
>> Jim Rojas
>>
>> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:e4iGe.39$0B5.3525@xxxxxxxxxxxxxxxxxx
>>> aha, I'll have to start scrounging chips then
>>>
>>>
>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>> news:jOeGe.15799$dM3.5763@xxxxxxxxxxx
>>>> Yep.
>>>>
>>>> Jim Rojas
>>>>
>>>>
>>>> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
>>>> news:mkeGe.40$nN3.10132@xxxxxxxxxxxxxxxxxx
>>>>> So the proprietary info is in the chip?...how about on ADT stuff..same
>>>>> thing?
>>>>>
>>>>> (I have a couple I can't use compass on- it'd be nice to be able to
>>>>> swap the chip rather than the entire board)
>>>>>
>>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>>> news:%fdGe.10562$6M3.6195@xxxxxxxxxxx
>>>>>> The firmare chip is the 3/4 inch square PLCC chip in the socket. It
>>>>>> usually has a white label on it stating the panel type & version.
>>>>>>
>>>>>> Jim Rojas
>>>>>>
>>>>>>
>>>>>> "Crash Gordon" <webmaster@xxxxxxxxxxxxxxxxxxxxx> wrote in message
>>>>>> news:QcdGe.67$vI1.20259@xxxxxxxxxxxxxxxxxx
>>>>>>> how do you mean; swap the firmware?
>>>>>>>
>>>>>>> curious
>>>>>>>
>>>>>>>
>>>>>>> "Jim Rojas" <jrojas@xxxxxxxxxxxx> wrote in message
>>>>>>> news:8taGe.10313$6M3.6773@xxxxxxxxxxx
>>>>>>>> No, that is a Monitronics version. I don't think you can even
>>>>>>>> monitor it. If you have an bad board laying around, try swapping
>>>>>>>> the firmware. You may also need to replace the keypad as well.
>>>>>>>>
>>>>>>>> Jim Rojas
>>>>>>>>
>>>>>>>>
>>>>>>>> "Nick Lawrence" <nlaw@xxxxxxx> wrote in message
>>>>>>>> news:ac53d$42e92a7c$43bca3f1$16529@xxxxxxxxxxxx
>>>>>>>>> Can this panel be downloaded with standard Compass software?
>>>>>>>>> Can it be reprogrammed at the keypad?
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>