[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC 632 - Using both 900Mhz and 433Mhz sensors

Subject: Re: DSC 632 - Using both 900Mhz and 433Mhz sensors
From: robertlbass@xxxxxxxxxxx
Date: 2 Dec 2005 18:15:21 -0800
Newsgroups: alt.security.alarms
References: <1133155709.828597.188640@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <7nxif.632482$oW2.79609@pd7tw1no> <HqGdnS4ckKIalRbeRVn-jQ@xxxxxxxxxx> <1133188535.181686.219120@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <HqidnTVOPNllhhbeRVn-iA@xxxxxxxxxxxx> <1133190893.606165.316880@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <0gKif.22782$xu.5307@fed1read01> <1133219068.791896.76500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>

The DSC receiver connects directly to the panel's databus, much like a
keypad is connected.  The Napco receiver connects to various voltage
outputs to sense the system's status and to a "keyswitch" zone to cause
the panel to arm/disarm.

Regards,
Robert L Bass
www.BassBurglarAlarms.com

Prev by Message: Re: How to get DSC alarm system to communicate with my PC? (hacks/mods ?)
Next by Message: Re: How do I block a (mains) smoke alarm (so my steam cleaner doesn't trigger it)
Previous by thread: Re: DSC 632 - Using both 900Mhz and 433Mhz sensors
Next by thread: Re: Power 832 "Low Battery" Error
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home