[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: relocate existing alarm panel.

Subject: Re: relocate existing alarm panel.
From: James Russo <jr@xxxxxxxxxxxxxxxx>
Date: Tue, 27 Dec 2005 14:44:51 GMT
Newsgroups: alt.security.alarms
References: <tj2sf.3587$bd.3219@xxxxxxxxxxxxxxxxxxxxxxx> <q06sf.195384$ki.195049@pd7tw2no>

> Put the zone expanders in the existing box, mount the main can
> downstairs where you're going to install your other wiring.  I'd avoid
> "extending wires" if you've going to be utilizing a panel like the Elk
> M1 (or any control that offers expansion modules).  Good luck!!


Franks. Thanks, good suggestion. I'll look into this. However, would
this mean that the zones will now be Zone 17+, or can you assign the
zones in the zone extender to be Zone 1? I guess it really doesn't
matter but it would see strange to have the zones not start on 1.

-jr

Follow-Ups:
- Re: relocate existing alarm panel.
  - From: Bob La Londe

References:
- relocate existing alarm panel.
  - From: James Russo
- Re: relocate existing alarm panel.
  - From: Frank Olson

Prev by Message: Re: UL Required to get License
Next by Message: Re: DSC 5010 Communication Problem
Previous by thread: Re: relocate existing alarm panel.
Next by thread: Re: relocate existing alarm panel.
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home