[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Ademco Panel

Subject: Re: Ademco Panel
From: "Travelin" <travelin03@xxxxxxxxx>
Date: 25 Dec 2005 07:54:06 -0800
Newsgroups: alt.security.alarms
References: <1135277616.319738.173350@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <gaGqf.10779$RZ6.6045@xxxxxxxxxxxxxxxxxxxxxx>

What I found is that there is a power-up installer code reset sequence
that will allow a reset of the installer code to factory default.
However it is possible for the installer to set a code that defeats the
power-up reset sequence, thus preventing a reset to the factory
default.  In this case Compass is required.

Follow-Ups:
- Re: Ademco Panel
  - From: Chub

References:
- Ademco Panel
  - From: Travelin
- Re: Ademco Panel
  - From: Chub

Prev by Message: NAPCO 1008 odd behavior
Next by Message: Re: User installed systems
Previous by thread: Re: Ademco Panel
Next by thread: Re: Ademco Panel
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home