[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: DSC 5010 Communication Problem

Subject: Re: DSC 5010 Communication Problem
From: "Jim" <alarminex@xxxxxxx>
Date: 15 Dec 2005 19:50:23 -0800
Newsgroups: alt.security.alarms
References: <14Nnf.3841$rq3.538@xxxxxxxxxxxxxxxxxxxxxxxxxx> <5Yeof.9114$kP5.3187@xxxxxxxxxxxxxxxxxxxxxx> <bnfof.3934$nA2.3784@xxxxxxxxxxxxxxxxxxxxxxxxxx> <V8gof.3047$n1.2425@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>

Russell Brill wrote:
> Only thing I've noticed about Napco panels (Gemini panels) that's strange,
> if you power the panel from the battery first and begin testing without
> applying AC the system won't accept new user codes... After applying AC and
> waiting 5 to 10 minutes, the problem goes away....
>
I think the instructions say to connect AC first. I've always done it
that way. Never experienced the problem you speak of.

Follow-Ups:
- Re: DSC 5010 Communication Problem
  - From: Russell Brill

References:
- DSC 5010 Communication Problem
  - From: Allan Waghalter
- Re: DSC 5010 Communication Problem
  - From: Chub
- Re: DSC 5010 Communication Problem
  - From: Allan Waghalter
- Re: DSC 5010 Communication Problem
  - From: Russell Brill

Prev by Message: Re: why ground an alarm panel.
Next by Message: Re: Power 832 "Low Battery" Error
Previous by thread: Re: DSC 5010 Communication Problem
Next by thread: Re: DSC 5010 Communication Problem
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home