[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Adding a third keypad to a Caddx NX-8, wiring help requested!

Subject: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
From: Robert L Bass <sales@xxxxxxxxxxxxxxxxxxxxx>
Date: Fri, 19 Aug 2005 22:41:14 -0400
Newsgroups: alt.security.alarms
References: <1124325989.739589.202500@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> <DZRMe.22479$Rm3.14481@xxxxxxxxxxxxxxxxxxxxxx> <AqUMe.364$ZE2.1050@xxxxxxxxxxxxxxx> <Kh_Me.13822$xW.1743@xxxxxxxxxxxxxxxxxxxxxx>

> GE recommends stranded and I have had problems
> with erratic behavior of kp after accidentally pulling
> solid wire to kp before...

Most likely you screwed up the connection or broke the conductor,
causing the initial problem.  There is no benefit to using
stranded wire (unless you have trouble stripping wire without
cutting the core).

> had to enter code 2-3 times for kp to work...

That's a Caddx keypad problem -- not a wire problem.

Regards,
Robert L Bass
www.BassBurglarAlarms.com



--

Regards,
Robert L Bass
http://www.bassburglaralarms.com

References:
- Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: brim
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: Crash Gordon
- Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
  - From: joe

Prev by Message: Re: THINKERS ANONYMOUS
Next by Message: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Previous by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Next by thread: Re: Adding a third keypad to a Caddx NX-8, wiring help requested!
Index(es):
- Message
- Thread

alt.security.alarms Main Index | alt.security.alarms Thread Index | alt.security.alarms Home | Archives Home